From open-mold
chaos to closed
control.

Infuse hydraulic press platens deliver 4,200 psi of uniform clamping force — eliminating edge flash, parting-line leakage, and the fiber distortion that kills structural certification.

Dual-cylinder architecture with closed-loop pressure feedback maintains ±0.5% force uniformity from center to corner. Qualifying a new wing skin geometry takes one tool qualification run, not five.

Dry fiber preforms demand a void-free resin front. Infuse vacuum systems hold 0.1 bar tolerance continuously — no micro-leaks, no pump cycling, no bubble nucleation at the flow front.

Integrated leak-down testing at tool close confirms seal integrity before a gram of resin enters the mold. Marine yard managers switching from open-mold report zero re-work on first-off parts.

Seventeen independently controlled thermal zones across the tool face hold ±0.5°C throughout the cure cycle — eliminating the residual stress gradients that crack blade roots under fatigue loading.

Wind-energy OEMs scaling from 50 to 500 blades per year report zero cure-induced warpage rework after switching to Infuse 17-zone tooling. Headcount scales with orders, not with quality escapes.